This new model universal PLC clamp have a wide range of uses and are particularly suited for the lifting and turning of steel plates, ship sections and the extraction of pile sheets. It fitted with a hinged hoisting eye moving in all directions so as to enable the user to place and lift the load from any directions.
Technical specialities
Guarantee a pre-load on the material being lifted.
Overall forged structure with good traceability and the safety factor of 6 times
It is fitted with a safety latch which ensures the proper use by means of a double locking device, both in open as well as closed position.

Plate lifting clamps are mechanically operated for smooth, fast and safe handling of plates both horizontally and vertically. These clamps will hold the plates with a friction gripping force, which can be locked through a lever, while holding the plate. Till the lever is unlocked, the plates are not released. They are very safe for handling of plates, with minimum manpower.

Specifications
1.The rated loading is the maximum weight as the angle is 60 degree and a pair of clamps are recommended.
2. One unit for working load limit, you can use one unit or two pieces matched use in the working.
3. It can only hoist one steel plate at one time, stack up lifting is forbidden.
4. To crash the cargos in the working is also forbidden.
5. It is necessary to pull the link handle up for straining the spring when hoisting the cargos.

Working load limit for loading capacity please consult diagram as below